Latest suspension spring inner Tenders | Government suspension spring inner Tenders

Central Government/Public Sector

CTN :44913516

16 May, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of one coach set of primary spring inner & outer for train-18 coaches to drg. no.aaa01055, item-1, alt b- 8 nos andaaa01056, item-1, alt c -8 noswith t.s.specns.t.s.17.248.100.05 amendment no.01 andt.s.17.471.101.01 amendment no.02. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44912956

23 Apr, 2026 NA

Yamunanagar - Haryana

Tender For supply of anti vibration mounting pad (cusy foot) b series with cast steel top, 5/8 inch tappered hole 5/8 inch x 50mm long ht bolt with spring washer, conf. to rdso spec no. rdso/pe/spe/ac/0084-2008 (rev-1), suitable for d.g. set base frame of rajdhani/shatabdi high capacity power cars. [warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44912276

08 May, 2026 NA

Delhi - Delhi

Tender For supply of bolster spring inner for lwlh 25 ton bogie. drawing no:- wd-15021 s/01, alt.-6, s.no.8& wd-98014 s/03, alt.-11, item no.2. spec. no:- wd - 01 - hls - 1994 (rev. 5). guarantee:- the springshall be guaranteed for a period of five years from the date of manufacture of the spring. (for details please see spec. no. wd-01-hls-1994, rev. 5). [ warranty period: 60 months after the date of delivery ]

Central Government / Public Sector

CTN :44708477

28 Apr, 2026 NA

Digboi - Assam

Tender For corrigendum : procurement of spares of ipco steel belt system of wpu - sld bar wt gap,pn:36272,rotoform 4g,ipco, slide bar right,pn:8445,rotoform 4g,ipco, slide bar left,pn:8444,rotoform 4g,ipco, slide bar trans,pn:6468,rotoform 4g,ipco, slide bar tran,pn:64762,rotoform 4g,ipco, plgh bar lng,p/n:025989,rotoform 4g,ipco, plgh bar shrt,pn:025988,rotoform 4g,ipco, safety scrapr,pn:006533,rotoform 4g,ipco, scraper blade,pn:006535,rotoform 4g,ipco, drv ply clnr,p/n:048126,rotoform 4g,ipco, tnsn ply clnr,pn:055660,rotoform 4g,ipco, ply clnr blade,pn:60818,rotoform 4g,ipco, water squeege,pn:048295,rotoform 4g,ipco, lamella,p/n:006539,rotoform 4g,ipco, brush,p/n:009754,rotoform 4g,ipco, sprt rlr rng,pn:010027,rotoform 4g,ipco, snapholder,p/n:005034,rotoform 4g,ipco, pull spring right,p/n-g-bt-002882, tensionspring left,p/n-g-bt-002854, take up brng,p/n:028117,rotoform 4g,ipco, fxd brng drv,p/n:028812,rotoform 4g,ipco, spray nozzle,p/n:025983,rotoform 4g,ipco, mounting clip,pn:019435,rotoform 4g,ipco, discrg knife,p/n:027285,rotoform 4g,ipco, bolt,p/n-g-bt-004385, sealing ring,p/n-g-bt-004833, sckt cap scrw,pn:005495,rotoform 4g,ipco, parallel pin,p/n:039821,rotoform 4g,ipco, parallel key,p/n:008667,rotoform 4g,ipco, sliding pad,p/n-g-bt-002360, countersunk screw,p/n-g-dn-005322, o ring,p/n:053408,rotoform 4g,ipco, o-ring,p/n:010754,rotoform 4g,ipco, prdiv nzl asy,pn:045582,rotoform 4g,ipco, brng housing,p/n:023552,rotoform 4g,ipco, berng housing,pn:023553,rotoform 4g,ipco, mounting ring,pn:022668,rotoform 4g,ipco, chain wheel, pno:g-bt-022674, brng housing,p/n:023573,rotoform 4g,ipco, brng housing,p/n:023555,rotoform 4g,ipco, sealing strip,pn:004517,rotoform 4g,ipco, chain wheel,p/n:005560,rotoform 4g,ipco, chain wheel,p/n:063336,rotoform 4g,ipco, chain wheel,p/n:042739,rotoform 4g,ipco, roller chain,p/n:023015,rotoform 4g,ipco, chn cplr link,pn:023014,rotoform 4g,ipco, o-ring, part no. g-dn-0023565, o-ring part no. g-dn-011408, o-ring part no. g-dn-010773, o-ring part no. g-dn-010815, slotted screw part no. g-dn-003012, cup spring , part no. g-dn-022686, sealing ring, hardened p/n. g-bt-023884, o-ring,p/n-g-dn-002176, o-ring,p/n-g-dn-002220, o-ring,p/n-g-dn-002219, set screw, id: g-dn-002968

Central Government/Public Sector

CTN :44912485

21 Apr, 2026 NA

Chennai - Tamil Nadu

Tender For bogie frame assly (machined) for air spring in secondary suspension for lhb coaches to drg no: (a) 66703001, col.i alt.'c' (or) (b*) 834-0-3-002, alt 'b' suppliers commitment will be there to supply as per drawing-(a) (for lhb non ac air spring coaches), or as per drawing -(b)(for lhb-ac air spring coaches) *for identification purpose of bogie frame, (i)drg (a) shall be marked with yellow paint on brake beam end face on both sidesof bogie frames and n227 is to be punched in letter height of 10mm after year or availble space on other location of bogie number plate, (ii)drg (b), a242 is to be punched in letter height of 10mm afteryear or availble space on other location of bogie number plate. the ratio of supply between (a) & (b) has to be confirmed before the issue of purchase order. rate quoted will beapplicable to both drawing-(a) and drawing-(b). special condition : the material specification for plates of various thickness used for fabrication of bogie frame will be as per en10025, part-5, 2005 . grade s355 j2w+n ,in lieu of earlier specified material grade st 52.3 and s355 j2 g3 , en10025/29 in various related sub assembly and component drawings and specn.mdts-213, rev-04 or latest and mdts-166, rev-02 or latest shall be generally followed. time lag between shot blasting and painting should not be more than 30 minutes in any case. packing condition as per document no.mpm0010 e ver-6.0 pi159 & packing condition as per drg.no. icf/j&t/sk-1823. stage inspection to be done as below. (a) raw material stage 1. ensure the raw material used using portable spectrometer machining stage 1. dimensional checks 2. edge preparations (b) welding stage 1. weld parameter to be checked and recorded. (c) surface preparation and painting stage. 1. short/sand blast to the requirements. 2. painting process as per the specification. 3. final product inspection. [ warranty period: 84 months after the date of delivery ]

Central Government/Public Sector

CTN :44912357

24 Apr, 2026 NA

Gwalior - Madhya Pradesh

Tender For supply of (1) hexagon head screw m6x50 mm length to is:-1364 (part-2):2002, material-ss304, qty-01no. (2) hexagon nut m6 as per is:-1364 (part-3):2002, material-ss304 qty-01no. (3) spring washer for m6 screw as per din127b, material-ss304-qty-01 no. (4) plain washer for m6 screw as per din125a-material: ss304, qty-01 no. (01 no. of each item makes 01 set). makes unbrako/tvs/gkw or similar. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44912731

30 Apr, 2026 NA

Jhansi - Uttar Pradesh

Tender For digital spring balance of capacity 50kg with 5gm/10gm accuracy with hook of make bulfyss or omega or "atom" or "birud" or equivalent calibration certificate from nabl accredited lab. to accompany with supplies without fail. one number sample to be sent before bulk supply. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44912599

22 Apr, 2026 NA

Kapurthala - Punjab

Tender For supply of bolster spring outer, as per drawing: ir drg no. w/be-3210 & technical specification no. wd-01-hls-1994 (rev. 03) of jan 2009 and amendment no. 02 of august 2018. procurement should be done from icf/rdso approved sources, packing instruction: packing as per standard packing [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44912705

27 Apr, 2026 NA

Hubli - Karnataka

Tender For supply of : m.s.hexagonal head bolt m8 x 12mm with spring washer to is spec-1363 (part-2) galvanized (84table 1 & 2 ) (to be supplied in 500 nos each packet ). acceptable make / brand: indegenous. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44912491

22 Apr, 2026 NA

Bengaluru - Karnataka

Tender For supply of set of hardware items for traction motor assembly type:6fra 6068. set consists of 8 items1) hex. socket head cap screw, size: m20x55mm x 2.5 pitch,10.9 grade (zn. plated) to per is:2269:2006full thread, qty/set-16 nos. 2) hex. socket head cap screw, size: m16x45mm x 2.0 pitch, 10.9 grade (zn. plated) to per is:2269:2006 full thread.qty/set-12 nos 3) hex. socket head cap screw, size: m12x30mm x1.75 pitch, 10.9 grade (zn. plated) to per is:2269:2006 full thread, qty/set-24 nos. 4) hex. socket head cap screw, size: m10x25mm x 1.5 pitch, 10.9 grade (zn. plated) to per is:2269:2006 full thread.qty/set-30 nos. 5) rectangular spring washer 20mm (zn plated) as per is:3063:1994, qty/set-64 nos. 6) rectangular spring washer 16mm (zn plated) as per is:3063:1994, qty/set-48 nos. 7) rectangular spring washer 12mm (zn plated) as per is:3063:1994, qty/set-96 nos. 8)rectangular spring washer 10mm (zn plated) asper is:3063:1994, qty/set-120 nos. [ warranty period: 30 months after the date of delivery ]

Suspension Spring Inner Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors